Tape designed for temporary use
Permanent tape used temporarily is one of the most common and expensive mistakes in event production. The adhesive system is not designed for removability, resulting in adhesive residue, damage, and unnecessary labor time. The products below are designed to hold precisely during the event – and detach cleanly afterward.
Gaffa for temporary surface fixation
tesa 4671 - 49.2mm x 50mis the industry standard for temporary fixation: high adhesion during the show, clean removability afterward. The adhesive system is optimized for 3–7 days of exposure on most surfaces. The tape tears easily by hand, saving time during quick dismantling. Etab 3336 Cloth Tape Allroundcomplements as a softer alternative for lighter fixations on more sensitive surfaces.
Double-sided for temporary floor fixation
tesa 4939is formulated for temporary use with up to 7 days of exposure on standard exhibition surfaces. Removes without residue from carpets and most concrete floors – the right choice for exhibition floor fixation with standard requirements.
Orafol 1450is the choice for more sensitive surfaces where permanent tape would damage the surface. Formulated with a milder adhesive system that provides good temporary fixation with easy and clean removability. The first choice when the hall agreement specifies responsibility for floor damage.
Masking tape for temporary marking and protection
WashiPro Etab 436 – Blue Outdooris intended for temporary use both indoors and outdoors. Withstands light moisture and UV exposure and removes without residue within the recommended time. Used for marking zones at outdoor events and exhibitions in open halls.
Etab 610is the economical choice for internal marking, protection, and temporary fixation of light elements during the construction phase. Etab 520is an even softer alternative for sensitive and decorated surfaces.
Hook and loop fasteners for repeated temporary fixations
Hook and loop fasteners 50mm x 25mis the smartest solution for installations that are built and rebuilt repeatedly. Once attached to the wall, always available – banners and panels are attached and detached without new tape every time. Combined with Hook and loop fasteners 30mm x 25mfor cable management, it significantly reduces material consumption and rigging time per event.
Checklist – choose the right tape for temporary installation
How long will the tape be applied? (1 day / 3 days / 1 week.) What surface? (Concrete, wood, fabric wall, aluminum profile.) Should the tape be removed by your staff or by the venue's staff? Are there specific requirements from the venue for tape-free surfaces? Answer these questions and you have the right starting points for your choice. Contact us if you are unsure – we respond quickly and help you choose correctly from the start.
Frequently asked questions
What happens if the tape stays on too long?
The adhesive hardens and adheres deeper to the surface, increasing the risk of residue. tesa 4939and Orafol 1450are designed for a maximum of 7 days – always remove within the recommended time.
Can I use the same tape outdoors and indoors?
Not always. WashiPro Etab 436is specifically formulated for outdoor use and withstands moisture and UV better than standard masking tape.
